| Step | | Procedure & Parts & Tools |
| 1 |
|
TURN KEY TO TURN OFF POWER TO MACHINE
|
| 2 |
|
LOCATE CHARGER PLUG ON BACK OF MACHINE AND PULL IT TO DISCONNECT THE BATTERIES
|
| 3 |
|
LOCATE THE DRAIN HOSES ON THE BACK OF THE MACHINE.
|
| 4 |
|
PULL TO REMOVE THE BLUE CAPPED HOSE FROM MACHINE. PLACE HOSE NEAR DRAIN AND REMOVE CAP
|
| 5 |
|
PULL TO REMOVE THE RED CAPPED HOSE FROM MACHINE. PLACE HOSE NEAR DRAIN AND REMOVE CAP
|
| 6 |
|
REMOVE THE 2 TANK BOLTS ON EACH SIDE OF THE MACHINE. THESE BOLTS ARE LOCATED AT THE FRONT OF THE MACHINE AT THE BASE.
| Wrench-Allen metric 6.0mm |
|
|
| 7 |
|
LIFT THE TANK TO OPEN THE MACHINE
|
| 8 |
|
DISCONNECT THE BATTERY CABLES AND REMOVE THE 2 BATTERIES FROM THE MACHINE.
| Wrench-metric 10mm |
|
| Wrench-metric 13mm |
|
|
| 9 |
|
REMOVE THE 2 BOLTS HOLDING THE BRUSH SHROUD.
| Wrench-Allen metric 6.0mm |
|
|
| 10 |
|
LAY THE MACHINE ON ITS SIDE.
|
| 11 |
|
REMOVE THE 3 SCREWS FROM THE COVER
| Wrench-Allen metric 6.0mm |
|
|
| 12 |
|
PULL TO REMOVE THE COVER
|
| 13 |
|
REMOVE 1 BOLT FROM BELT TENSIONER
| Wrench-Allen metric 6.0mm |
|
|
| 14 |
|
PULL TO REMOVE THE BELT TENSIONER
|
| 15 |
|
PULL THE BELT OFF THE BRUSH PULLEY
|
| 16 |
|
REMOVE THE 3 SCREWS HOLDING THE DRIVE HUB.
| Torx T25 |
|
|
| 17 |
|
PULL TO REMOVE THE DRIVE HUB.
|
| 18 |
|
REMOVE THE 6 BOLTS FROM BRUSH PULLEY COVER.
| Ratchet-Socket metric 10mm |
|
|
| 19 |
|
PULL TO REMOVE THE BRUSH PULLEY COVER
|
| 20 |
|
PULL TO REMOVE THE CENTER PLUG (USE CRESCENT WRENCH IF NEEDED)
| Crescent wrench |
|
|
| 21 |
|
REMOVE THE SNAP RING FROM THE PULLEY CENTER.
| Snap ring pliers |
|
|
| 22 |
|
SNAP RING IS REMOVED FROM MACHINE.
|
| 23 |
|
SLIDE THE BRUSH PULLEY FROM THE SHAFT.
|
| 24 |
|
FLIP THE BRUSH PULLEY OVER AND REMOVE THE NUT HOLDING THE BAD BUFFER(ISOLATOR).
| Ratchet-Socket metric 10mm |
|
|
| 25 |
|
FLIP THE BRUSH PULLEY OVER AND REMOVE THE BAD BUFFER(ISOLATOR) FROM THE BRUSH PULLEY.
|
| 26 |
|
REVERSE STEPS 6 THRU 25 TO INSTALL A NEW BUFFER(ISOLATOR)AND REASSEMBLE THE MACHINE. RECONNECT THE BATTERIES AND BATTERY CABLES USING THE DIAGRAM SHOWN HERE.
|